TDS5000B Online Programmer Guide
-- 5 6 1 --
MEASUrement:IMMed:VALue?
Description
This query--only command returns the value of the measurement speci-
fied by the MEASUrement:IMMed:TYPe command. The measurement
is immediately taken on the source(s) specified by a MEASUre-
ment:IMMed:SOURCE command.
Note: A change to HORizontal:MAIn:SCALe or CH<x>:SCALe will
not necessarily have taken affect if followed by this command.
Group
Measurement
Related Commands
MEASUrement:IMMed:TYPe, MEASUrement:IMMed:SOURCE,
*ESR?, ALLEV?
Syntax
MEASUrement:IMMed:VALue?
Example
MEASUrement:IMMed:VALue?
This query might return
:MEASUREMENT:IMMED:VALUE 9.9000E+37
If the measurement has an error or warning associated with it, then an
item is added to the error queue. The error can be checked for with the
*ESR? and ALLEV? commands.
To Next Page
Loading...
