Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 5 9 --
HORizontal:FASTframe:XZEro:SELECTED:CH<x>?
Description
This query--only command returns xzero for FastFrame Selected, with-
in the specified waveform. The channel is specified by x. The value of
x can range from 1 through 4 for four-channel instruments or 1 through
2 for two-channel instruments.
Xzero is the subsample time between the trigger sample (designated by
WFMOutpre:PT_Off?) and the occurrence of the actual trigger for the
waveform specified.
Group
Horizontal
Related Commands
WFMOutputpre:XZEro?, WFMOutpre:PT_Off?,
HORizontal:FASTframe:XZEro:ALL:CH<x>?,
HORizontal:FASTframe:XZEro:ALL:REF<x>?,
HORizontal:FASTframe:XZEro:FRAme:CH<x>?,
HORizontal:FASTframe:XZEro:FRAme:REF<x>?,
HORizontal:FASTframe:XZEro:REF?,
HORizontal:FASTframe:XZEro:SELECTED:REF<x>?
Syntax
HORizontal:FASTframe:XZEro:SELECTED:CH<x>?
Example
HORizontal:FASTframe:XZEro:SELECTED:CH1?
This query might return:
:HORIZONTAL:FASTFRAME:XZERO:SELECTED:CH1
1.4647E-9\n’
This is the xzero of FastFrame Selected for the channel 1 waveform.