TDS5000B Online Programmer Guide
-- 4 9 7 --
MASK:USER:VSCAle
Description
This command sets or returns the nominal vertical scale, in volts per
division, used to vertically scale the input channels. The query form of
this command returns the vertical scale value of the displayed mask.
The set form of this command only affects the User mask, regardless of
the current (displayed) mask.
Group
Mask
Related Commands
MASK:USER:VOFFSet , MASK:USER:VPOS
Syntax 1
MASK:USER:VSCAle <NR3>
Syntax 2
MASK:USER:VSCAle?
Argument
H <NR3>
Is a floating point number that sets the nominal bit width in seconds.
Example
MASK:USER:VSCALE 200e-3
Sets the User mask nominal vertical scale to 200 millivolts per division
To Next Page
Loading...
Need help?
General
