Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 0 9 --
CALibrate:PROBEstate:CH<x>?
Description
This query--only command returns the probe calibration status for the
probe of the selected channel, 1 through 4.
Group
Calibration
Related Commands
CH<x>:PROBECal?
Syntax
CALibrate:PROBEstate:CH<x>?
Returns
H -1
Indicating the probe calibration failed for the selected channel.
H 0
Indicating the probe calibration passed for the selected channel.
H 1
Indicating the probe calibration is initialized for the selected channel.
H 2
Indicating that the probe calibration for the selected channel is run-
ning.
Example
CALibrate:PROBEstate:CH1?
This query might return
:CALIBRATE:PROBESTATE:CH1 0
Indicating that the probe calibration for Channel 1 passed.