Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 9 2 --
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce
Description
This command sets or queries the clock source for the A logic trigger
setup and hold input. This is equivalent to selecting Setup/Hold Setup
from the Trig menu and choosing the desired channel from the Clock
Source drop--down list.
Group
Trigger
Related Commands
TRIGger:A:LOGIc:SETHold:CLOCk:EDGE,
TRIGger:A:LOGIc:SETHold:CLOCk:THReshold
Syntax 1
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce CH<x>
Syntax 2
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce?
Argument
H CH<x>
This specifies the input channel, which ranges from 1 through 4 for
four--channel instruments or 1 through 2 for two channel instruments.
Example 1
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce?
This query might return
:TRIGGER:A:LOGIC:SETHOLD:CLOCK:SOURCE CH4
indicating that channel 4 is the clock source for the setup and hold in-
put. For the A logic trigger.
Example 2
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce CH1
This command specifies channel 1 as the A logic setup and hold input.