TDS5000B Online Programmer Guide
-- 11 8 --
CH<x>:LABel:NAMe
Description
This command sets or queries the label attached to the displayed wave-
form for the specified channel. The channel is specified by x. The value
of x can range from 1 through 4 for four--channel instruments or 1
through 2 for two--channel instruments. This command is equivalent to
selecting Label from the Vertical menu.
Group
Vertical
Syntax 1
CH<x>:LABel:NAMe <str>
Syntax 2
CH<x>:LABel:NAMe?
Argument
H <str>
This is an alphanumeric character string, ranging from 1 through 32
characters in length.
Example 1
CH2:LABel:NAMe ”Pressure”
This command changes the waveform label for the CH2 waveform to
”Pressure”.
Example 2
CH3:LABel:NAMe?
This query might return
:CH3:LABEL:NAME ”CH3”
indicating that the waveform label for the CH 3 waveform is ”CH3”.
To Next Page
Loading...
