TDS5000B Online Programmer Guide
-- 2 1 4 --
DIAg:SELect:SUBSYS
Description
This command (no query form) selects one of the available subsystems.
This command is equivalent to selecting Instrument Diagnostics from
the Utilities menu and then choosing a Subsystem from the drop--down
list.
Note: This command should be executed only if DIAg:LEVEL is
currently set to SUBSYS.
Group
Diagnostics
Related Commands
DIAg:SELect:AREA, DIAg:SELect:LAST, DIAg:SELect:TEST
Syntax
DIAg:SELect:SUBSYS <NR1>
Argument
H <NR1>
This selects a subsystem by number, which can range from 0 (zero
selects ALL) through 15 (as specified by DIAg:NUMITEMS).
Example
DIAg:SELect:SUBSYS
This command selects Subsystem 1 as the subsystem to be diagnosed.
To Next Page
Loading...
