Tektronix TDS5000B Series - Limit:savwfm:filename

TDS5000B Online Programmer Guide
-- 3 9 1 --
LIMit:SAVWFM:FILEName
Description
This command sets or queries the path where waveforms or log files
will be saved when the waveform data exceeds the limits set by the lim-
it test.
Group
Limit Test
Related Commands
Syntax 1
LIMit:SAVEWFM:FILEName {<string>}
Syntax 2
LIMit:SAVEWFM:FILEName?
Argument
H <string>
This argument is a string containing the path of the waveform to be
saved.
Example 1
LIMit:SAVEWFM:FILEName MyLimitTestWaveform
This command sets the path where a waveform will be saved when it
exceeds the limits of the limit test.
Example 2
LIMit:SAVEWFM:FILEName?
This query might return:
:LIMIT:SAVEWFM:FILENAME ”MyLimitTestWave-
form.wfm”
This indicates the path were the waveform will be saved when it ex-
ceeds the limits of the limit test.