Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 8 4 6 --
ZOOm:ZOOM<x>:<wfm>:HORizontal:SCAle
Description
This command sets or queries the zoom horizontal scale factor of the
specified waveform for the specified zoom, where x is an integer from
1 to 4 representing the desired zoom window.
Group
Zoom
Syntax 1
ZOOm:ZOOM<x>:<wfm>:HORizontal:SCAle <NR3>
Syntax 2
ZOOm:ZOOM<x>:<wfm>:HORizontal:SCAle?
Argument
H <NR3>
This is the amount of expansion in the horizontal direction in 1--2 --5
increments.
Example 1
ZOOm:ZOOM1:CH1:HORizontal:SCAle 5
This command sets the horizontal scale factor of Channel 1 to 5.
Example 2
ZOOm:ZOOM2:CH2:HORizontal:SCAle?
This query might return :ZOOM2:CH2:HORIZONTAL:SCALE 1,
indicating that Channel 2 has a horizontal scale factor of 1.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet