Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 5 9 --
CURSor:WAVEform:SOUrce<x>
Description
This command sets or queries the source for a waveform cursor. The
cursor is specified by x, which can be 1 or 2.
Group
Cursor
Syntax 1
CURSor:WAVEform:SOUrce
{CH<x>|MATH<x>|REF<x>}
Syntax 2
CURSor:SOUrce?
Arguments
H CH<x>
Sets an input channel waveform as the cursor source. The valid chan-
nel waveform range is from 1 through 4 for four--channel instruments
or 1 through 2 for two channel --instruments.
H MATH<x>
Sets a math waveform as the cursor source. The valid math waveform
range is from 1 through 4 for four--channel instruments or 1 through 2
for two channel--instruments.
H REF<x>
Sets a reference waveform as the cursor source. The valid reference
waveform range is from 1 through 4 for four--channel instruments or 1
through 2 for two channel --instruments.
Example 1
CURSor:WAVEform:SOUrce CH2
This command sets the Cursor1 source to channel 2.
Example 2
CURSor:WAVEform:SOUrce?
This query might return
:CURSOR:WAVEFORM:SOURCE1 CH2
indicating that the Cursor1 source is channel 2.