TDS5000B Online Programmer Guide
-- 5 0 3 --
MATH<x>:LABel:YPOS
Description
This command sets or queries the Y screen offset at which the label
attached to a math waveform is displayed, relative to the top edge of the
screen. The Math waveform is specified by x, which ranges from 1
through 4 for four--channel instruments or 1 through 2 for two--channel
instruments. This command is equivalent to selecting Math Label from
the Math menu and entering a value in the Y Position box.
Group
Math
Related Commands
MATH<x>:LABel:XPOS
Syntax 1
MATH<x>:LABel:YPOS <NR1>
Syntax 2
MATH<x>:LABel:YPOS?
Argument
H <NR1>
This is the location (in pixels) where the label for the selected math
waveform is displayed, relative to the top edge of the screen. Argu-
ments should be integers ranging from 0 to 400.
Example 1
MATH2:LABel:YPOS -25
This command moves the waveform label for the MATH2 waveform to
just beneath (25 pixels below) the top of the screen.
Example 2
MATH2:LABel:YPOS?
This query might return
:MATH2:LABEL:YPOS 0
indicating that the waveform label for the MATH2 waveform is current-
ly located just beneath the top of the screen.
To Next Page
Loading...
