TDS5000B Online Programmer Guide
-- 3 2 8 --
HIStogram:SIZe
Description
This command sets or queries the width or height of the histogram on
the screen. This is equivalent to selecting Waveform Histograms from
the Measure menu and then entering a value in the Histogram Size box.
Group
HIStogram
Related Commands
HIStogram:DISplay
Syntax 1
HIStogram:SIZe <NR3>
Syntax 2
HIStogram:SIZe?
Arguments
H <NR3>
This specifies the histogram size. The value can vary from 0.1 to 8.0
divisions in HORizontal mode and from 0.1 to 10.0 divisions in VER-
Tical mode. Resolution is to the nearest pixel.
Example 1
HIStogram:SIZe 2.0
This command sets the size of the histogram to 2.0 divisions.
Example 2
HIStogram:SIZe?
This query might return
:HISTOGRAM:SIZE 2.0000E+01
This indicates the histogram size is set to 2.0 divisions.
To Next Page
Loading...
