Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 2 1 --
HIStogram:COUNt
Description
This command (no query form) clears the count and statistics for the
histogram and the histogram source data. If the histogram is on, then
counting restarts. This command is equivalent selecting Waveform His-
tograms from the Measure menu and then clicking the Reset button.
Group
HIStogram
Related Commands
HIStogram:Box, HIStogram:BOXPcnt
Syntax
HIStogram:COUNt RESET
H RESET
This zeros the histogram count.
Example
HIStogram:COUNt RESET
This command clears the count and statistics for the histogram and the
histogram source data.