Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 5 2 0 --
MATH<x>:SPECTral:UNWRap
Description
This command sets or returns whether phase unwrap of the spectral
analyzer output data is enabled for the specified math waveform. The
Math waveform is specified by x, which ranges from 1 through 4 for
four--channel instruments or 1 through 2 for two--channel instru-
ments.This command is equal to selecting Spectral Setup from the Math
menu, choosing the Phase tab and then clicking the Unwrap button.
Group
Math
Related Commands
MATH<x>:SPECTral:SUPPress
Syntax 1
MATH<x>:SPECTral:UNWRap <ON|OFF>
Syntax 2
MATH<x>:SPECTral:UNWRap?
Arguments
H ON
This enables phase unwrap.
H OFF
This disables phase wrap.
H <NR1>
A 0 disables phase wrap; any other value enables phase wrap.
Example 1
MATH1:SPECTral:UNWRap ON
This command enables phase wrap of the spectral analyzer output data.
Example 2
MATH1:SPECTral:UNWRap?
This query might return
:MATH1:SPECTRAL:UNWRAP 0
indicating that phase unwrap of the spectral analyzer output data is dis-
abled.