Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 9 5 --
TRIGger:A:LOGIc:SETHold:DATa:SOUrce
Description
This command sets or queries the data source for the setup and hold
trigger. This command is equivalent to selecting Setup/Hold Setup from
the Trig menu and choosing the desired channel from the Data Source
drop--down list.
Group
Trigger
Related Commands
TRIGger:A:LOGIc:SETHold:DATa:THReshold
Syntax 1
TRIGger:A:LOGIc:SETHold:DATa:SOUrce CH<x>
Syntax 2
TRIGger:A:LOGIc:SETHold:DATa:SOUrce?
Argument
H CH<x>
This specifies the input channel, which ranges from 1 through 4 for
four--channel instruments or 1 through 2 for two--channel instru-
ments..
Example 1
TRIGger:A:LOGIc:SETHold:DATa:SOUrce?
This query might return
:TRIGGER:A:LOGIC:SETHOLD:DATA:SOURCE CH2
indicating that channel 2 is the current clock source for the setup and
hold trigger.
Example 2
TRIGger:A:LOGIc:SETHold:DATa:SOUrce CH1
This command sets channel 1 as the clock source for the setup and hold
trigger.