TDS5000B Online Programmer Guide
-- 6 4 --
*LRN?
Description
This query--only command returns the commands that list the instru-
ment settings (except for configuration information for the calibration
values), allowing you to record or ”learn” the current instrument set-
tings. You can use these commands to return the instrument to the state
it was in when you made the *LRN? query. This command is identical
to the SET? Command.
Group
Miscellaneous
Related Commands
SET?
Syntax
*LRN?
Example
*LRN?
This query might return the following response:
:ACQUIRE:STOPAFTER RUNSTOP;STATE 1;MODE SAM-
PLE;NUMENV 10;NUMAVG 16;NUMSAMPLES 16000;SAM-
PLINGMODE IT;:FASTACQ:STATE 0;:APPLICA-
TION:GPKNOB1:ACTIVE
0;:APPLICATION:GPKNOB2:ACTIVE 0;:APPLICA-
TION:WINDOW:HEIGHT 236;WIDTH 640;:APPLICA-
TION:SCOPEAPP:STATE RUNNING;WINDOW FULL-
SCREEN;:APPLICATION:EXTAPP:STATE
NOTRUNNING;:VARIABLE:EVENT:REPORT BOTH;:AUX-
OUT:SOURCE ATRIGGER;EDGE FALLING;:CMDBATCH
1;:HEADER 1;:LOCK NONE;:ROSC:SOURCE INTER-
NAL;:VERBOSE 1;:ALIAS:STATE 0;:DISPLAY:CLOCK
1;COLOR:PALETTE:IMAGEVIEW TEMPERATURE;RECORD-
VIEW NORMAL;USER:GRATICULE 165,50,15;CH1
180,50,100;CH2 300,50,100;CH3 60,50,100;CH4
240,50,100;REF1 0,90,0;REF2 0,90,100;REF3
60,90,100;REF4 240,90,100;MATH1
160,50,100;MATH2 40,60,100;MATH3
120,60,100;MATH4 195,50,100;HISTOGRAM
320,50,100;CARET 150,50,100;MASK 0,25,75;MASK-
HIGHLIGHT 140,50,100;:DISPLAY:COLOR:MATHCOLOR
DEFAULT..
To Next Page
Loading...
Need help?
General
