TDS5000B Online Programmer Guide
-- 1 4 9 --
CURSor:SOUrce<x>
Description
This command sets or queries the source(s) for the currently selected
cursor type (H Bars, V Bars, Waveform, or Screen). The cursor is speci-
fied by x, which can be 1 or 2. If the cursor is not specified, it defaults
to cursor 1.
This command is equivalent to selecting Cursor Setup from the Cursors
menu, and then choosing the desired cursor source.
Group
Cursor
Syntax 1
CURSor:SOUrce {CH<x>|MATH<x>|REF<x>}
Syntax 2
CURSor:SOUrce?
Arguments
H CH<x>
Sets an input channel waveform as the cursor source. The valid chan-
nel waveform range is from 1 through 4 for four--channel instruments
or 1 through 2 for two channel --instruments.
H MATH<x>
Sets a math waveform as the cursor source. The valid math waveform
range is from 1 through 4 for four--channel instruments or 1 through 2
for two channel--instruments.
H REF<x>
Sets a reference waveform as the cursor source. The valid reference
waveform range is from 1 through 4 for four--channel instruments or 1
through 2 for two channel --instruments.
Returns
Any valid waveform.
Example 1
CURSor:SOUrce1 CH2
This command sets the Cursor1 source to channel 2.
To Next Page
Loading...
Need help?
General
