TDS5000B Online Programmer Guide
-- 2 4 3 --
DISplay:INTENSITy:SCREENSAVERDELAY
Description
This command sets or queries the timeout of the screen saver features
of the display system. When enabled (after the specified screen saver
delay seconds of control activity and when the screen saver feature is
enabled) the instrument activates the screen saver feature. Normal in-
strument displays are restored and the delay timer is reset upon any
control activity. The instrument continues to acquire and process data
normally while in screen saver mode; only the display is disabled. This
command is equivalent to selecting Objects from the Display menu and
entering a time in the Delay field of the LCD Backlight Timeout con-
trol.
Group
Display Control
Related Commands
DISplay:INTENSITy:SCREENSAVER
Syntax 1
DISplay:INTENSITy:SCREENSAVERDELAY {<NR1>}
Syntax 2
DISplay:INTENSITy:SCREENSAVERDELAY?
Arguments
H <NR1>
This sets the screen saver timeout, which ranges from 30 through
28800 seconds.
Example 1
DISplay:INTENSITy:SCREENSAVERDELAY 120
This command sets the screen saver delay feature to activate after 120
seconds of control inactivity.
Example 2
DISplay:INTENSITy:SCREENSAVERDELAY?
This query might return:
:DISPLAY:INTENSITY:SCREENSAVERDELAY 300
This indicates that the screen saver delay feature is set to 300 seconds
of control inactivity.
To Next Page
Loading...
Need help?
General
