Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 2 --
ACQuire:NUMEnv
Description
This command sets or queries the number of waveform acquisitions
that make up an envelope waveform. Sending this command is equiva-
lent to setting the # of Wfms in the Acquisition Setup menu when En-
velope Acquisition mode is selected.
Group
Acquisition
Syntax 1
ACQuire:NUMEnv {<NR1>|INFInite}
Syntax 2
ACQuire:NUMEnv?
Arguments
H NR1
This is the number of waveform acquisitions to be enveloped.
Example 1
ACQuire:NUMenv 10
This command specifies that an enveloped waveform will show the
result of combining 10 separately acquired waveforms.
Example 2
ACQuire:NUMenv?
This command might return
:ACQUIRE:NUMENV 0
indicating that acquisitions are acquired infinitely for enveloped wave-
forms.