Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 6 9 --
*RCL
Description
This command (no query form) restores the state of the instrument from
a copy of the settings stored in memory (The settings are stored using
the *SAV command). If ’factory’ is referenced (by specifying ’0’), the
factory default values will be restored.
This command is equivalent to RECAll:SETup and performs the same
function as selecting Recall from the File menu, and then pressing the
Setup button.
Group
Save and Recall
Related Commands
DELEte:SETUp, FACtory, *LRN?, RECAll:SETUp, *RST, *SAV,
SAVe:SETUp
Syntax
*RCL <NR1>
Argument
H <NR1>
This specifies a setup storage location value ranging from 0 through
10. Using an out--of--range value causes an execution error.
Example
*RCL 3
This command restores the instrument from a copy of the settings
storedinmemorylocation3.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English