Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 5 3 7 --
MEASUrement:IMMed:REFLevel:ABSolute:HIGH
Description
This command sets or queries the high reference level, and is the upper
reference level when MEASUrement:IMMed:REFLevel:METHod is
set to Absolute. Note that this command affects the results of rise and
fall measurements.
Group
Measurement
Related Commands
MEASUrement:IMMed:REFLevel:METHod
Syntax 1
MEASUrement:IMMed:REFLevel:ABSolute:HIGH <NR3>
Syntax 2
MEASUrement:IMMed:REFLevel:ABSolute:HIGH?
Arguments
H <NRf>
This is the high reference level, in volts. The default is 0.0 V.
Example 1
MEASUREMENT:IMMed:REFLEVEL:ABSOLUTE:HIGH 1.71
This command sets the high reference level to 1.71 V.
Example 2
MEASUREMENT:IMMED:REFLEVEL:ABSOLUTE:HIGH?
This query might return
:MEASUREMENT:IMMED:REFLEVEL:ABSOLUTE:HIGH
1.7100E+00
indicating that the absolute high reference level is set to 1.71 V.