TDS5000B Online Programmer Guide
-- 6 1 4 --
MEASUrement:STATIstics:WEIghting
Description
This command sets or queries the time constant for mean and standard
deviation statistical accumulations. This command is equivalent to se-
lecting Measurement Setup from the Measure menu, clicking the Statis-
tics button and entering the desired Weight n= value.
Group
Measurement
Related Commands
MEASUrement:STATIstics:MODE
Syntax 1
MEASUrement:STATIstics:WEIghting <NR1>
Syntax 2
MEASUrement:STATIstics:WEIghting?
Argument
H <NR1>
This is the time constant for the mean and standard deviation statisti-
cal accumulations.
Example 1
MEASUrement:STATIstics:WEIghting 4
This command sets statistical weighting to 4.
Example 2
MEASUrement:STATIstics:WEIghting?
This query might return
:MEASUREMENT:STATISTICS:WEIGHTING 4
indicating that measurement statistics weighting is currently set to 4.