TDS5000B Online Programmer Guide
-- 3 9 4 --
LIMit:STOPOnviolation
Description
This command sets or queries whether acquisitions are stopped when
the waveform data exceeds the test limits.
Group
Limit Test
Related Commands
Syntax 1
LIMit:STOPOnviolation {OFF|ON|NR1}
Syntax 2
LIMit:STOPOnviolation?
Arguments
H OFF
This argument disables the stop on violation feature.
H ON
This argument enables the stop on violation feature so that when the
waveform data exceeds the limits set by the limit test, acquisitions are
stopped.
H NR1
A 0 disables the stop on violation feature; any other value enables the
stop on violation feature so that when the waveform data exceeds the
limits set by the limit test, acquisitions are stopped. For queries, a 0 is
returned if the stop on violation feature is off; a 1 is returned if the
stop on violation feature is on.
Example 1
LIMit:STOPOnviolation 1
This command enables the stop on violation feature so that when the
waveform data exceeds the limits set by the limit test, acquisitions are
stopped.
Example 2
LIMit:STOPOnviolation?
This query might return:
:LIMIT:STOPONVIOLATION 0
This indicates that the stop on violation feature is disabled.
To Next Page
Loading...
Need help?
General
