To Next Page

To Previous Page

TDS5000B Online Programmer Guide

-- 5 3 0 --

MEASUrement:GATing

Description

This command specifies or returns the measurement gating setting. This

command is equivalent to selecting Gating from the Measure menu and

then clicking the desired Measurement Gating setting.

Group

Measurement

Syntax 1

MEASUrement:GATing {ON|OFF|<NR1>|ZOOM|CURSOR}

Syntax 2

MEASUrement:GATing?

Arguments

H ON

This turns on measurement gating.

H OFF

This turns off measurement gating.

H <NR1>

A 0 turns off measurement gating; any other value turns on measure-

ment gating.

H ZOOM<x>

This turns on gating, using the left and right edges of the zoom box.

<x> specifies the zoom window, which ranges from 1 through 4.

H CURSOR

This limits measurements to the portion of the waveform between the

vertical bar cursors, even if they are off screen.

Example 1

MEASUrement:GATing ON

This command turns on measurement gating.

Example 2

MEASUrement:GATing?

This query might return

:MEASUREMENT:GATING CURSOR

indicating that measurements are limited to the portion of the waveform

between the vertical bar cursors.

Tektronix TDS5000B Series Online Programmer Guide

Other manuals for Tektronix TDS5000B Series