Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 9 3 --
LIMit:STATE
Description
This command sets limit testing on or off or queries whether limit test-
ingisineffect.
Group
Limit Test
Related Commands
Syntax 1
LIMit:STATE {OFF|ON|<NR1>}
Syntax 2
LIMit:STATE?
Arguments
H OFF
This argument disables limit testing.
H ON
This argument turns on limit testing of waveforms.
H NR1
A 0 disables the limit testing operation; any other value turns on limit
testing of waveforms. For queries, a 0 is returned if limit testing is off;
a 1 is returned if the limit testing is on.
Example 1
LIMit:STATE ON
This command specifies that limit testing of waveforms is on.
Example 2
LIMit:STATE?
This query might return:
:LIMIT:STATE 0
This indicates that the limit testing of waveforms is off.