TDS5000B Online Programmer Guide
-- 6 2 5 --
REF<x>:LABel:YPOS
Description
This command sets or queries the Y screen offset at which the label
(attached to the displayed waveform of the specified reference) is dis-
played, relative to the top edge of the screen. The reference waveform
is specified by x. The value of x can range from 1 through 4 for four--
channel instruments or 1 through 2 for two--channel instruments. This
command is equivalent to selecting Reference Waveforms from the File
menu, choosing Label from the drop--down list, selecting the tab associ-
ated with the reference for which you want to position a label, and en-
tering a value in the Y Position box.
Group
Vertical
Related Commands
REF<x>:LABel
Syntax 1
REF<x>:LABel:YPOS <NR1>
Syntax 2
REF<x>:LABel:YPOS?
Argument
H <NR1>
This is the location (in pixels) where the waveform label for the se-
lected reference is displayed, relative to the top edge of the screen.
Arguments should be integers ranging from 0 to 385.
Example 1
REF3:LABel:YPOS -10
This command moves the waveform label for the REF 3 waveform to
just beneath (10 pixels) the top of the screen.
Example 2
REF2:LABel:YPOS?
This query might return
:REF2:LABEL:YPOS 0
indicating that the waveform label for the REF 2 waveform is currently
located just beneath the top of the screen.