TDS5000B Online Programmer Guide
-- 7 8 8 --
TRIGger:B:TIMe
Description
This command sets or queries B trigger delay time. The B Trigger time
applies only if TRIGger:B:BY is set to TIMe. This command is equiva-
lent to selecting B Event (Delayed) Trigger Setup from the Trig menu,
choosing the A→B Seq tab, and setting Trig Delay.
Group
Trigger
Related Commands
TRIGger:B:BY, TRIGger:B:EVENTS:COUNt
Syntax 1
TRIGger:B:TIMe <NR3>
Syntax 2
TRIGger:B:TIMe?
Argument
H <NR3>
This is the B trigger delay time in seconds.
Example 1
TRIGger:B:TIMe?
This query might return
:TRIGGER:B:TIME 16.0000E-9
indicating that the B trigger time is set to 16 ns.
Example 2
TRIGger:B:TIMe 4E-6
This command sets the B trigger delay time to 4 µs.
To Next Page
Loading...
