TDS5000B Online Programmer Guide
-- 1 2 6 --
CH<x>:PRObe:ID:SERnumber?
Description
This query--only command returns the serial number of the probe that is
attached to the specified channel. The channel is specified by x. The
value of x can range from 1 through 4 for four--channel instruments or
1 through 2 for two --channel instruments.
Note: For Level 0 and 1 probes, the serial number will be ”N/A”.
Group
Vertical
Syntax
CH<x>:PRObe:ID:SERnumber?
Example
CH1:PRObe:ID:SERnumber?
This query might return
:CH1:PROBE:ID:SERNUMBER ”B010289”
indicating that the serial number of the probe attached to channel 1 is
B010289.
To Next Page
Loading...
