Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 0 --
*RST
Description
This command (no query form) resets the instrument to the factory de-
fault settings. The *RST command does not alter the following:
H The state of the IEEE Std 488.1 --1987 interface
H The selected IEEE Std 488.1 --1987 address of the instrument
H Calibration data that affect device specifications
H The Output Queue
H The Service Request Enable Register setting
H The Power--on status clear flag setting
H Alias definitions
H Stored settings
H The *PUD? Response
H Any of the values associated with the DATA command.
This command is equivalent to pressing the DEFAULT SETUP button
on the front panel.
Group
Status and Error
Related Commands
FACtory, RECAll:SETUp, SAVe:SETUp
Syntax
*RST
Argument
None
Example
*RST
This command resets the instrument settings to factory defaults.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English