Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 4 0 --
DISplay:INTENSITy:AUTOBright
Description
This command enables automatic, ongoing adjustment of the intensity
to display images. The query form returns a 1 (ON) or a 0 (OFF). This
command is equivalent to selecting Display Setup from the Display
menu and choosing the Appearance tab.
Group
Display Control
Related Commands
DISplay:INTENSITy:WAVEform:IMAGEView, DISplay:INTENSI-
Ty:WAVEform:RECORDView
Syntax 1
DISplay:INTENSITy:AUTOBright {OFF|ON|<NR1>}
Syntax 2
DISplay:INTENSITy:AUTOBright?
Arguments
H OFF
This argument allows the system to use the manually set waveform
intensity value against an absolute scale. The display simulates the
appearance of signals on an analog oscilloscope. Waveforms that trig-
ger more frequently appear brighter than waveforms that trigger less
frequently.
H ON
This argument allows the system to adjust the settings automatically
to provide a visible waveform.
H <NR1>
A 0 allows the system to use the manually--set waveform intensity
value against an absolute scale; any other value allows the system to
adjust settings.
Example 1
DISplay:INTENSITy:AUTOBright ON
This command allows the system to adjust settings using the waveform
intensity value and the pixel intensity found in the acquired waveform.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English