Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 6 0 --
HORizontal:FASTframe:XZEro:SELECTED:REF<x>?
Description
This query--only command returns xzero for FastFrame Selected within
the specified waveform. The reference waveform is specified by x. The
value of x can range from 1 through 4 for four-channel instruments or 1
through 2 for two-channel instruments.
Xzero is the subsample time between the trigger sample (designated by
WFMOutpre:PT_Off?) and the occurrence of the actual trigger for the
waveform specified.
Group
Horizontal
Related Commands
WFMOutputpre:XZEro?, WFMOutpre:PT_Off?,
HORizontal:FASTframe:XZEro:ALL:CH<x>?,
HORizontal:FASTframe:XZEro:ALL:REF<x>?,
HORizontal:FASTframe:XZEro:FRAme:CH<x>?,
HORizontal:FASTframe:XZEro:FRAme:REF<x>?,
HORizontal:FASTframe:XZEro:REF?,
HORizontal:FASTframe:XZEro:SELECTED:CH<x>?
Syntax
HORizontal:FASTframe:XZEro:SELECTED:REF<x>?
Example
HORizontal:FASTframe:XZEro:SELECTED:REF1?
This query might return:
:HORIZONTAL:FASTFRAME:XZERO:SELECTED:REF1
1.4647E-9\n’
This is the xzero of FastFrame Selected for the reference 1 waveform.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English