Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 6 9 --
MASK:TESt:HARDCopy
Description
This command sets or returns the hard copy in pass/fail failure mode.
When enabled, this command causes the oscilloscope to generate a
screen hard copy, using the current oscilloscope hard copy settings, as
soon as the pass/fail status changes to ‘Failing’. In other words, it prints
the screen to the default printer.
Group
Mask
Syntax 1
MASK:TESt:HARDCOPY {OFF|ON|<NR1>}
Syntax 2
MASK:TESt:HARDCOPY?
Arguments
H ON
Turns on generate hard copy on failure.
H OFF
Turns off generate hard copy on failure.
H <NR1>
A 0 turns off generate hard copy on failure, and any other value turns
on generate hard copy on failure.
Example
MASK:TEST:HARDCOPY ON
Turns on generate hard copy on failure.