Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 1 9 2 --
DELEte:WAVEform
Description
This command (no query form) deletes one or all stored reference wa-
veforms from memory.
This command is equivalent to selecting Delete from the File menu,
and then choosing the reference waveform you want to delete; choosing
All Refs deletes all of the reference waveforms.
Group
Save and Recall
Related Commands
RECAll:WAVEform, Save:WAVEform
Syntax
DELEte:WAVEform {ALL|REF<x>}
Arguments
H ALL
This specifies to delete all the stored reference waveforms.
H REF<x>
This specifies to delete one of the reference memory locations. Refer-
ence memory location values range from 1 through 4.
Example 1
DELEte:WAVEform ALL
This command removes all waveforms stored in reference memory.
Example 2
DELEte:WAVEform REF2
This command removes the waveform stored at REF2.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet