Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 1 8 6 --
DATa:SOUrce
Description
This command sets or queries the location of waveform data that is
transferred from the instrument by the CURVe? Query.
Group
Waveform Transfer
Related Commands
CURVe?
Syntax 1
DATa:SOUrce <wfm>[<,><wfm>]
Syntax 2
DATa:SOUrce?
Argument
H• <wfm>
This is the location of the waveform data that will be transferred from
the instrument to the controller.
Example 1
DATa:SOUrce?
This query might return
:DATA:SOURCE REF3
indicating that the source for the waveform data which is transferred
using a CURVe? Query sis reference 3.
Example 2
DATa:SOUrce CH1
This command specifies that the CH1 waveforms will be transferred in
thenextCURVe?query.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English