Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 5 4 2 --
MEASUrement:IMMed:REFLevel:PERCent:HIGH
Description
This command sets or queries the percentage (where 100% is equal to
HIGH) used to calculate the high reference level when MEASUre-
ment:IMMed:REFLevel:METHod is set to Percent. Note that this com-
mand affects the results of rise and fall measurements.
Group
Measurement
Related Commands
MEASUrement:IMMed:REFLevel:METHod
Syntax 1
MEASUrement:IMMed:REFLevel:PERCent:HIGH <NR1>
Syntax 2
MEASUrement:IMMed:REFLevel:PERCent:HIGH?
Arguments
H <NR1>
This is the high reference level, ranging from 0 to 100%. The default
high reference level is 90%.
Example 1
MEASUREMENT:IMMED:REFLEVEL:PERCENT:HIGH 95
This command sets the high reference level to 95% of HIGH.
Example 2
MEASUREMENT:IMMED:REFLEVEL:PERCENT:HIGH?
This query might return
:MEASUREMENT:IMMED:REFLEVEL:PERCENT:HIGH 90
indicating that the percentage high reference level is set to 90% of
HIGH.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English