TDS5000B Online Programmer Guide
-- 8 3 0 --
WFMOutpre:YOFf?
Description
This query--only command returns the vertical offset in digitized levels
for the waveform specified by the DATa:SOUrce command. For those
formats in which BYT_NR is important (all non--floating point for-
mats), this command must take the location of the binary point implied
by WFMOutpre:BYT_Nr into consideration.
An error is reported if the DATa:SOUrce waveform does not exist.
Group
Waveform Transfer
Related Commands
DATa:SOUrce, WFMOutpre:BYT_Nr
Syntax
WFMOutpre:YOFf?
Example
WFMOutpre:YOFf?
This query might return
:WFMOUTPRE:YOFF -50.0000E+0
indicating that the position indicator for the waveform was 50 digitizing
levels (2 divisions) below center screen.
To Next Page
Loading...
