TDS5000B Online Programmer Guide
-- 11 3 --
CH<x>:BANdwidth
Description
This command sets or queries the selectable low--pass bandwidth limit
filter of the specified channel. The channel is specified by x. The value
of x can range from 1 through 4 for four--channel instruments or 1
through 2 for two--channel instruments. This is equivalent to selecting
Bandwidth from the Vertical menu.
The query form of this command always returns the maximum band-
width of the channel.
Group
Vertical
Syntax 1
CH<x>:BANdwidth {TWEnty|ONEfif-
ty|FIVe|FULl|<NR3>}
Syntax 2
CH<x>:BANdwidth?
Arguments
H TWEnty
This sets the upper bandwidth limit to 20 MHz.
H ONEfifty
This sets the upper bandwidth limit to 150 MHz.
H FIVe
This argument sets the upper bandwidth limit to 500 MHz.
H FULl
This disables any optional bandwidth limiting. The specified channel
operates at its maximum attainable bandwidth.
H <NR3>
This argument is a double--precision ASCII string. The instrument
rounds this value to an available bandwidth using geometric rounding
and then uses this value set the upper bandwidth.
To Next Page
Loading...
Need help?
General
