Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 4 1 9 --
MASK:AUTOSet:VSCAle
Description
This command controls whether the autoset algorithm will affect the
vertical scale while attempting to autoset.
This command, like all the MASK:AUTOSET commands, affects only
an autoset on a standard mask, not the general oscilloscope autoset
function.
Group
Mask
Syntax
MASK:AUTOSet:VSCAle {ON|OFF|<NR1>}
Arguments
H ON
This enables the autoset:vscale function, causing … to occur.
H OFF
This disables the autoset:vscale function, causing … to occur.
H <NR1>
A 0 disables the autoset:vscale function; any other value enables it.
Example
MASK:AUTOSet:VSCAle ON
Enables the autoset:vscale function.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet