Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 7 3 --
MASK:TESt:SAMple:THReshold
Description
This command sets or returns the minimum number of hits in mask
regions needed to cause the pass/fail status to change from PASSING to
FAILING. This affects the mask test when the oscilloscope is acquiring
in waveform database (WfmDB) mode.
Group
Mask
Syntax 1
MASK:TESt:SAMple:THReshold {<NR1>}
Syntax 2
MASK:TESt:SAMple:THReshold?
Arguments
H <NR1>
The number of hits that can happen when the test fails.
Example
MASK:TEST:SAMPLE:THRESHOLD 100
The test will fail when 100 or more hits happen.