TDS5000B Online Programmer Guide
-- 6 2 4 --
REF<x>:LABel:XPOS
Description
This command sets or queries the X screen offset at which the label
(attached to the displayed waveform of the specified reference) is dis-
played, relative to the left edge of the screen The reference waveform is
specified by x. The value of x can range from 1 through 4 for four--
channel instruments or 1 through 2 for two--channel instruments. This
command is equivalent to selecting Reference Waveforms from the File
menu, choosing Label from the drop--down list, selecting the tab associ-
ated with the reference for which you want to position a label, and en-
tering a value in the X Position box.
Group
Vertical
Related Commands
REF<x>:LABel
Syntax 1
REF<x>:LABel:XPOS <NR1>
Syntax 2
REF<x>:LABel:XPOS?
Argument
H <NR1>
This is the location (in pixels) where the waveform label for the se-
lected reference is displayed, relative to the left edge of the screen.
Arguments should be integers ranging from 0 through 500.
Example 1
REF4:LABel:XPOS 10
This command moves the waveform label for the REF3 waveform, so
that it begins 10 pixels to the right of the left edge of the screen.
Example 2
REF2:LABel:XPOS?
This query might return
:REF2:LABEL:XPOS 150
indicating that the x--axis for the REF 2 waveform is currently 150 pix-
els to the right of the left edge of the screen.
To Next Page
Loading...
Need help?
General
