Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 5 7 4 --
MEASUrement:MEAS<x>:REFLevel:ABSolute:MID[1]
Description
This command sets or queries the mid reference level, and is the 50%
reference level when MEASUrement:MEAS<x>:REFLevel:METHod
is set to Absolute. Measurements are specified by x, which ranges from
1 through 8.
Note: This command affects the results of period, frequency, delay,
and all cyclic measurements.
Group
Measurement
Related Commands
MEASUrement:MEAS<x>:REFLevel:METHod
Syntax 1
MEASUrement:MEAS<x>:REFLevel:ABSolute:MID[1]
<NR3>
Syntax 2
MEASUrement:MEAS<x>:REFLevel:ABSolute:MID[1]?
Arguments
H <NR3>
This is the mid reference level, in volts. The default is 0.0 V.
Example 1
MEASUREMENT:MEAS1:REFLEVEL:ABSOLUTE:MID[1] .71
This command sets the mid reference level to .71 V.
Example 2
MEASUREMENT:MEAS1:REFLEVEL:ABSOLUTE:MID[1]?
This query might return
:MEASUREMENT:MEAS1:REFLEVEL:ABSOLUTE:MID
0.7100E+00
indicating that the absolute mid1 reference level is set to .71 V.