Tektronix TDS5000B Series - Cursor:mode

TDS5000B Online Programmer Guide
-- 1 4 7 --
CURSor:MODe
Description
This command sets or queries whether the two cursors move together in
unison or separately. This command is the equivalent of selecting Cur-
sor Mode from the Cursors menu, and then choosing from the drop--
down list.
Group
Cursor
Syntax 1
CURSor:MODe {TRACk|INDependent}
Syntax 2
CURSor:MODe?
Arguments
H TRACk
Ties the navigational functionality of the two cursors together.
For cursor 1 adjustments, this ties the movement of the two cursors
together; however, cursor 2 continues to move independently of cur-
sor 1.
H INDependent
Allows independent adjustment of the two cursors.
Example 1
CURsor:MODe TRACk
This command specifies that the cursor positions move in unison.
Example 2
CURSor:MODe?
This query might return
:CURSOR:MODE TRACK
indicating that the two cursors move in unison.