Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 7 0 --
CURSor:XY:READOUT
Description
This command sets or queries the XY cursor readout (available when
DISplay:FORMat is set to XY).
Group
Cursor
Related Commands
DISplay:FORMat
Syntax 1
CURSor:XY:READOUT {RECTangular|POLAR-
Coord|PRODuct|RATio}
Syntax 2
CURSor:XY:READOUT?
Arguments
H RECTangular
Displays the following values: X1, X2, ∆X, Y1, Y2, ∆Y, t1, t2, ∆t.
H POLARCoord
Displays the following values: r1, r2, ∆r, θ1, θ2, ∆θ,t1,t2,∆t.
H PRODuct
Displays the following values: X1 x Y1, X2 xY2, ∆Xx∆Y, t 1, t2, ∆t.
H RATio
Displays the following values: Y1 ÷ X1, Y2 ÷ X2, ∆Y ÷ x ∆X, t1, t2,
∆t.
Example 1
CURsor:XY:READOUT RECTangular
This command sets the XY cursor readout to rectangular.
Example 2
CURSor:XY:READOUT?
This query might return
:CURSOR:XY:READOUT RECTANGULAR
indicating that the XY cursor readout is set to rectangular mode.