Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 5 9 --
TRIGger:A:COMMunication:CMI:PULSEForm
(Option SM Only)
Description
This command sets or queries the CMI pulse form.
Group
Trigger
Syntax 1
TRIGger:A:COMMunication:CMI:PULSEForm
(PLUSOne|MINUSOne|ZERO|EYEDiagram}
Syntax 2
TRIGger:A:COMMunication:CMI:PULSEForm?
Arguments
H PLUSOne
Triggers on a positive mark.
H MINUSOne
Triggers on a negative mark.
H ZERO
Triggers on the bit representing zero.
H EYEDiagram
Positions the trigger point off screen in order to display the eye.
Example 1
TRIGger:A:COMMunication:CMI:PULSEForm PLUSOne
This command sets triggering to occur on a positive mark.
Example 2
TRIGger:A:COMMunication:CMI:PULSEForm?
This query might return
:TRIGGER:A:COMMUNICATION:CMI:PULSEFORM PLUSONE
indicating that the pulse form is PLUSONE.