TDS5000B Online Programmer Guide
-- 4 3 0 --
MASK:DISplay
Description
Sets or returns whether or not defined masks are displayed on the
screen. This is useful for temporarily turning off user defined masks
without deleting them. It is also useful for removing a standard mask
from the screen, but leaving it as the selected standard. Mask counting,
mask testing, and mask autoset are not available if the mask display is
Off. The default is On.
Group
Mask
Syntax 1
MASK:DISplay {OFF|ON|<NR1>}
Syntax 2
MASK:DISplay?
Arguments
H ON
Shows the masks on the display. This is the default value.
H OFF
Removes the masks from the display
H <NR1>
A 0 removes the masks from the display; any other value shows the
masks on the display.
Example
MASK:DISPLAY ON
Sets the display to show the defined masks
Example 2
MASK:DISPLAY?
Might return 1, indicating that the display shows masks
To Next Page
Loading...
Need help?
General
