Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 0 1 --
MASK:AUTOAdjust
Description
This command optimizes signal position within the mask to minimize
hits. It sets a mode so that the MASK:SOURCE waveform is compared
against the mask and is shifted up, down, left, or right to minimize the
hits.
Group
Mask
Syntax
MASK:AUTOAdjust {ON|OFF|<NR1>}
Arguments
H ON
This enables the autoadjust function.
H OFF
This disables the autoadjust function
H <NR1>
A 0 disables the autoadjust function; any other value enables it.
Example
MASK:AUTOAdjust ON
Enables the autoadjust function