Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 8 0 9 --
WFMInpre:YMUlt
Description
This command sets or queries the vertical scale factor (in units/digitiz-
ing level) for the reference waveform, specified by DATa:DESTination,
upon a CURVe command.
Group
Waveform Transfer
Related Commands
DATa:DESTination, WFMInpre:BYT_Nr, WFMInpre:YUNit
Syntax 1
WFMInpre:YMUlt <NR3>
Syntax 2
WFMInpre:UMUlt?
Argument
H <NR3>
This is the vertical scale factor per digitizing level of the incoming
waveform points.
Example 1
WFMInpre:YMUlt?
This query might return
:WFMINPRE:YMULT 40.0000E-3
indicating that the vertical scale is 40 mV/digitizing level (1V/div).
Example 2
WFMInpre:YMUlt 20E-3
This command specifies that (if WFMInpre:YUNit is ”V” and
WFMInpre:BYT_Nr is 1), the vertical scale is 20 mV/digitizing level
(500 mV/div).

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English