Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 2 4 --
DISplay:COLOR:PALEtte:USEr:CARet
Description
This command sets or queries the caret color for the user palette. It as-
signs the HUE, light, Saturation (HLS) triplet used for the caret color.
The caret is the solid, inverted delta positioned on the top graticule line,
which indicates the trigger position within the waveform record.
Group
Display Control
Syntax 1
DISplay:COLOr:PALEtte:USEr:CARet
<NR1>,<NR1>,<NR1>
Syntax 2
DISplay:COLOr:PALEtte:USEr:CARet?
Arguments
H <NR1>
Hue. Range of 0 to 360.
H <NR1>
Lightness. Range of 0 to 100.
H <NR1>
Saturation. Range of 0 to 100.
Example 1
DISplay:COLOr:PALEtte:USEr:CARet 330,75,100
This command sets the caret color hue to 330, the lightness to 75, and
the saturation to 100.
Example 2
DISplay:COLOr:PALEtte:USEr:CARet?
This query might return
:DISPLAY:COLOR:PALETTE:USER:CARET 250, 85, 90
indicating that the color hue is set at 250, the lightness is set to 85, and
the saturation is set to 90.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet