TDS5000B Online Programmer Guide
-- 4 3 --
Save and Recall Command Group
Use the commands in the Save and Recall Command Group to store
and retrieve internal waveforms and settings. When you save a setup,
you save all the settings of the instrument. When you recall a setup, the
instrument restores itself to the state that it was in when you originally
saved that setting.
Command Description
*RCL Restores the state of the instrument from
a copy of the setting stored in memory
*SAV Stores the current instrument state to a
specified memory location
*SDS Changes the specified setup to reference
the factory setup instead of the user setup
DELEte:SETUp Removes stored setups from memory and
initializes the location with the factory de-
fault setups
DELEte:WAVEform Deletes (one or all of) the stored reference
waveforms from memory
FACtory Resets the instrument to factory default
settings
RECAll:SETUp Recalls saved instrument settings
RECAll:WAVEform Recalls a stored waveform to a reference
location
SAVe:SETUp Saves the current front--panel setup to a
specified memory location or file
SAVe:WAVEform Saves a waveform to one of four reference
memory locations or a mass storage file
SAVe:WAVEform:FILEFormat Sets or returns the format for saved wave-
forms
SETUp:NAMe Sets or returns the user--defined setup la-
bel
To Next Page
Loading...
Need help?
General
