TDS5000B Online Programmer Guide
-- 2 4 2 --
DISplay:INTENSITy:SCREENSAVER
Description
This command sets and queries the screen saver features of the MS
Windows operating system. When enabled, a delay timer (set in sec-
onds by the DISplay:INTENSITy:SCREENSAVERDELAY command)
begins counting down. When this screen saver delay times out, the
screen low--power mode engages. This causes the LCD backlight to
switch off and clears both waveform and text displays. Any control
(front panel, mouse or keyboard) or touch screen activity resets the
delay timer and restores normal instrument display. This command is
equivalent to selecting LCD Save Enabled from the Display menu.
Group
Display Control
Related Commands
DISplay:INTENSITy:SCREENSAVERDELAY
Syntax 1
DISplay:INTENSITy:SCREENSAVER {OFF|ON|<NR1>}
Syntax 2
DISplay:INTENSITy:SCREENSAVER?
Arguments
H OFF
This disables the screen saver feature.
H ON
This enables the screen saver feature after the specified screen saver
delay seconds of control activity have passed.
H <NR1>
A 0 disables the screen saver feature; a 1 enables the screen saver
protection features.
Example 1
DISplay:INTENSITy:SCREENSAVER OFF
This command disables the screen saver feature.
Example 2
DISplay:INTENSITy:SCREENSAVER?
This query might return
:DISPLAY:INTENSITY:SCREENSAVER 0
This indicates that the screen saver feature is disabled.
To Next Page
Loading...
Need help?
General
